Alles was Sie über Expanite wissen müssen
At Expanite we have a great amount of experience and knowledge. We crafted this FAQ page to answer many of the frequently asked questions we are asked along the way.
Q:Which materials and alloys can be treated/hardened?
A:Most stainless-steel grades incl. austenitic, martensitic, Duplex and ferritic. Titanium incl. Grade 5. Selective nickel-based alloys.
Q:Which surface hardness values can be achieved?
A:Generally, it depends on the material/alloy. With SuperExpanite on stainless steel typically 1200HV0.05. With ExpaniteHigh-T on martensitic and ferritic alloys typically 650 to 900HV0.05. With ExpaniteHard-Ti on titanium typically 1000HV0.05.
Q:Does the high hardness cause brittleness?
A:Generally, no, but in very thin-walled components (less than 0.5 mm) it can.
Q:Is the corrosion resistance affected?
A:Corrosion resistance is depending on many elements; the selection of alloy, machining, hardening, application, etc. In many cases, Expanite hardening is improving corrosion resistance compared to alternative hardening processes, and in many cases also compared to a non-hardened reference. Generally, corrosion resistance is not reduced.
Q:Which diffusion depths can be achieved?
A:For the Low-T part of SuperExpanite, between 5 and 35µm and for ExpaniteHigh-T up to 2mm but typical 3-500µm. ExpaniteHard-Ti on titanium, in the range 20 to 80µm
Q:What are the maximum treatable dimensions and weights?
A:1m is the maximum length we can handle at the moment, and maximum 300kg
Q:What are the minimum treatable dimensions and weights?
Q:Is the whole surface area treated?
A: Yes. The hardening gasses stubbornly gets everywhere and as a consequence every exposed surface gets hardened.
Q:Is bulkware treatment possible
A:Yes, as all Expanite processes are gas-based, and the gas truly gets everywhere, parts can be treated as bulkware. Single-piece handling is naturally available if required for sensitivity reasons
Q:Is a selective treatment of certain surface areas possible?
A:No – the gasses will go everywhere.
Q: What is the delivery time?
A:The standard is 6-9 working days counting from when parts arrive at Expanite, but since processing is an overnight event, lead times down to 2-3 working days can be offered against express fees.
Q:Will the color change?
A:The color of the part is not changing, but the surface becomes slightly rougher which affect the light reflection, thereby causing the appearance to be more dull and/or greyish.
Q:Is it possible to get documentation?
A:Yes, we have excellent lab facilities and can provide you with detailed laboratory reports with hardness measurements and micrographs if needed.
Q:Are you ISO certified?
A:Yes, Expanite’s sites are all ISO-certified according to ISO9001:2015.
Q:Does Expanite offer FDA compliant treatments?
A:Yes. Analyses done by external research institutions confirm that SuperExpanite on austenitic AISI316 is compliant with FDA regulations.
Q:Do you treat other materials than stainless steel, and titanium?
A:Not really; Expanite is focusing primarily on hardening and heat treatment of stainless steel and titanium.
Q:Can you handle uncleaned items?
A:Yes, we have delicate cleaning equipment to handle cutting oils etc.
Q:What’s the price for a test?
A:Typically, trials start with min. €300-500 incl. lab work – but it depends on your specific requirements.
Q:What´s the price for running production?
A:In order for us to make a formal quotation we need to understand your parts (via a drawing), your requirements and batch sizes or yearly volume.
Q:How do I select the most appropriate treatment for my application?
A:Our expert team will make sure that your items gets the right treatment – just let us know what material/alloys you are using as well as information on your application and potentially any specific requirements.
Q:What are the unique benefits of Expanite?
A:Most importantly, Expanite processes have faster lead-times, better corrosion performance and are typically competitive in price compared to alternative stainless steel hardening processes available on the market.
Q:Does anyone else offer an equivalent to the Expanite processes?
A:No – you can only get Expanite hardening processes from Expanite. Most of our processes are patented and we have 10+ years on know-how built into our technology.
Q:Do I need to pre-clean my parts prior to sending them to Expanite for surface treatment?
A:Yes, please. Expanite can offer to clean/wash your parts prior to hardening but all quotations/pricing is assuming that parts are delivered cleaned to Expanite unless agreed differently.